Research Laboratory “High-Temperature Synthesis of Composite Materials”

The laboratory provides consulting services to representatives of small and medium-sized businesses in the field of metallurgy and materials science. It has extensive experience in the production of…

3team members
1984founded

Team 3

Protopopov Maxim Anatolyevich

Protopopov Maxim Anatolyevich

– Engineer, Head of the Research Laboratory “HTSCM”, Research Institute of Natural and Technical Sciences, NJSC Auezov University

Protopopov Anatoly Vsevolodovich

Protopopov Anatoly Vsevolodovich

Doctor of Technical Sciences, Professor. Chief Researcher, Research Laboratory “HTSCM”, Research Institute of Natural and Technical Sciences, NJSC Auezov University

Suleimenov Erkinbek Ayataevich

Suleimenov Erkinbek Ayataevich

– Candidate of Technical Sciences, Leading Researcher, Research Laboratory “HTSCM”, Research Institute of Natural and Technical Sciences, NJSC Auezov University, Doctor of Technical Sciences, Professor

Key information

The laboratory provides consulting services to representatives of small and medium-sized businesses in the field of metallurgy and materials science. It has extensive experience in the production of special steels and alloys, refining of melts, and heat and chemical-heat treatment of machine and mechanism parts.

Activities

The scientific research area of the Laboratory of High-Temperature Synthesis of Composite Materials (“HTSCM”) of the Department of Science and Production of the Research Institute of Natural and Technical Sciences of NJSC Auezov University is the creation of new composite materials and powder fillers for special purposes.

Research and design of special equipment for carrying out research work in accordance with approved plans and incoming orders.

It plans new promising research in the scientific field of materials science and metallurgy, taking into account advances in science and technology.

The laboratory actively takes part in developing projects for competitions of the Ministry of Education and Science of the Republic of Kazakhstan for the funding of scientific projects, and concludes commercial contracts with business enterprises.

Historical background

The laboratory was established in 1984 under the name “Laboratory of Powder Materials” by order of the Rector of the Kazakh Chemical Technological Institute (KazKhTI) Sh.M. Moldabekov, on the recommendation of the Vice-Rector for Science B.Zh. Zhanabayev, at the Department of Descriptive Geometry and Engineering Graphics (DGEG). The metallurgical engineer, Candidate of Technical Sciences A.V. Protopopov was appointed scientific supervisor of the laboratory; mechanical engineers E.A. Suleimenov and M.A. Abdaliev were taken on as researchers; and the following worked in the laboratory part-time: Associate Professor and Head of the DGEG Department Zh.Zh. Dzhanabayev, Senior Lecturer E.M. Vetrova, Lecturer O.M. Voskresenskaya, Associate Professor K.M. Goncharov and others.

The purpose of establishing the laboratory was to develop a new area of research at KazKhTI in the field of powder metallurgy and to develop technologies for manufacturing machine parts by powder metallurgy methods, as resource-saving processes for producing parts with special properties: “self-lubricating” plain bearings and parts operating under intensive wear (excavator bucket teeth, dies, mouthpieces for brick pressing, bushings for the cardan shaft of a tracked tractor).

The laboratory fulfilled orders for the following plants: the Chimkent Cardan Shaft Plant, the Cotton Mill, the Chimkent Brick Plant, the Excavator Plant, the Chimkent Lead Plant, the Zyryanovsk Lead-Zinc Combine, and the Research Institute of Physics of Solid State and Materials Science of the Siberian Branch of the USSR Academy of Sciences. The research was carried out under commercial contracts, the funds from which were used to create the laboratory facilities, which made it possible to develop a research area that was new for Kazakhstan and KazKhTI.

Technologies have been developed for producing bushings from steel powder for the cardan shaft of the DT-54 tractor, for which a special pressing scheme and a new press mould design were developed.

An energy-saving technology has been developed for producing special surfacing powders for corrosion-resistant and wear-resistant protective coatings, using a flux obtained from ferrophosphorus of the Chimkent Phosphorus Plant.

Technologies have been developed for stabilizing the phosphorus content in ferrophosphorus by producing an iron–phosphorus eutectic alloy with 12.5% phosphorus. This significantly broadened the range of applications of ferrophosphorus and increased its value.

A technology has been developed for producing surfacing electrodes for electric arc surfacing of protective coatings and restoration of worn parts.

A technology has been developed for producing centrifugal pump parts with a corrosion-resistant working layer by casting (producing bimetal parts without additional energy consumption).

All the technologies have been tested under production conditions and introduced into the practical activities of customers with a significant economic effect.

Laboratory staff have defended three candidate dissertations and one doctoral dissertation.

A plant for the carbothermic production of technical-grade silicon from quartzites of South Kazakhstan was designed and, jointly with LLP “Steklo K”, built; work on the second phase of the plant is continuing.

The laboratory has developed a technology for producing nanostructured alloy catalysts based on eutectic alloys for petrochemistry.

Jointly with the Research Laboratory of Innovative Production “Structural and Biochemical Materials”, research was conducted and a technology was developed for producing high-strength, chemically resistant glass-ceramics (sitalls) for the construction of special facilities.

At present, at the pilot experimental facility being established, technologies are being developed for producing cermets and special-purpose composites: radiation-shielding and radar-absorbing composite materials and converters of gamma-photon energy into electricity.

Strategy for the development of research of the research laboratory “htscm”

  • 1Creation of converters of gamma-photon energy into electricity
  • 2Creation of a radiation testing laboratory at the Research Institute of Natural and Technical Sciences
  • 3Training of scientific personnel in radiation-shielding materials and composites for direct conversion of gamma radiation energy into electricity.

Technologies developed for innovative production

  1. A technology for casting excavator bucket teeth with a wear-resistant working layer made of a special high-carbon alloy. It was introduced at the Zyryanovsk Lead-Zinc Combine, East Kazakhstan Region.
  2. A technology for casting centrifugal pumps with a corrosion-resistant and abrasion-resistant working layer made of a special high-alloy material, using an energy-saving process. It was introduced at the Zyryanovsk Lead-Zinc Combine, East Kazakhstan Region, with an economic effect of more than 9 million tenge and a practical sixfold increase in pump durability when pumping acid-abrasive slurry in the “Gold Section” of the combine.
  • 1A technology has been developed for protective surfacing of a high-alloy eutectic alloy on the coolers (caissons) of a smelting furnace in lead production. The technology was tested and accepted for implementation by the lead plant. The tests confirmed the effectiveness of the surfacing, with an increase in the period of trouble-free furnace operation. This technology can be used to protect machine parts and apparatus operating in aggressive environments. The results merit the attention of the chemical and metallurgical industries.
  • 2A technology has been developed for producing high-purity silicon from quartzites, and the first phase of production has been launched, yielding technical-grade silicon and “white soot” – a mixture of silicon dioxide and silicon monoxide powders that serves as raw material for the production of high-purity silicon. The production was organized jointly with LLP “Steklo K”.
  • 3At present, composite powders for special radiation-shielding composite materials have been obtained by a special technology. The research is being carried out jointly with the National Centre for Complex Processing of Mineral Raw Materials (RSE on the right of economic management), under an assignment of the Ministry of Industry and Innovative Development. The study of the shielding properties of the new composite materials was carried out jointly with the Institute of Nuclear Physics of the Ministry of Energy of the Republic of Kazakhstan.

Prospects

The Research Laboratory of High-Temperature Synthesis of Composite Materials is working on the creation of highly effective radiation-shielding composites and products made from them for healthcare facilities (rehabilitation centres, sanatoriums, X-ray rooms), future nuclear power plants, and the agricultural sector for seed treatment and disinfection.

Creation of a scientific and experimental centre for radiation-shielding materials and for testing innovative technologies in the field of radiation materials science, based on the development of the laboratory and the establishment of a production base in the field of special materials science.

Main publications

  1. 1. Protopopov A.V., Rakov M.V., Tarasov S.Yu., Yakovlev I.I., Golovanov V.A., Novomeysky Yu.D., Minchensky L.S. Structure, properties and application of the high-alloy “ISTs-1” alloy under abrasive wear. – Collection of reports of the All-Union Scientific and Technical Meeting “Improving the Technical and Economic Indicators of Production and the Quality of Products of Foundry Shops of Non-Ferrous Metallurgy Enterprises”, Zaporozhye, 1983. Pp. 87-90.

    2. Protopopov A.V., Slosman A.I. Manufacture of tungsten-free hard alloys with a damping binder by the impregnation method. Proceedings of the All-Union Scientific and Technical Meeting “Powder Metallurgy”. – Tomsk, 1983. Pp. 23-28

    Intellectual property documents:

    List

    of scientific works of Doctor of Technical Sciences, Professor Protopopov Anatoly Vsevolodovich

    №

    Title

    Printed / manuscript

    Title of publication, journal, issue, year

    No. of printed sheets

    Co-authors

    1

    2

    3

    4

    5

    6

    1.

    Structure, properties and application of the high-alloy “ISTs-1” alloy under abrasive wear

    Printed

    Collection of reports of the All-Union Scientific and Technical Meeting “Improving the Technical and Economic Indicators of Production and the Quality of Products of Foundry Shops of Non-Ferrous Metallurgy Enterprises”, Zaporozhye, 1983. Pp. 87-90

    4 pp.

    Rakov M.V.

    Tarasov S.Yu., Yakovlev I.I., Golovanov V.A., Novomeysky Yu.D.

    Minchensky L.S.

    2.

    Manufacture of tungsten-free hard alloys with a damping binder by the impregnation method.

    Printed

    Proceedings of the All-Union Scientific and Technical Meeting “Powder Metallurgy”. – Tomsk, 1983. Pp. 23-28

    6 pp.

    Slosman A.I.

    3.

    Use of phosphorus production waste by powder metallurgy methods.

    Printed

    Proceedings of the All-Union Conference “Ways of Using Secondary Resources for the Production of Building Materials and Products”. Chimkent, 1986. Pp. 27-29

    3 pp.

    Ermakov S.S.

    Bekzhanov L.M., Suleimenov E.A.

    4.

    Anticorrosive wear-resistant coatings obtained from chemical industry waste.

    Printed

    Proceedings of the All-Union Conference “Khimtekhnika-88”, Chimkent, 1988,

    с.5-9

    5 pp.

    Abdaliev M.A., Bekzhanov L.M., Komekbaev A.A.

    5.

    Properties of powder steels at low and elevated temperatures

    Printed

    Proceedings of the All-Union Seminar “Application of Powder and Composite Materials in the 13th Five-Year Plan”, Leningrad, 1989, pp. 2-4

    3 pp.

    Ermakov S.S., Ermakov B.S.

    Suleimenov E.A.

    Academic Secretary of the Council of SKSU, Candidate of Technical Sciences, Associate Professor Pusurmanova G.Zh.

    Degree applicant, Doctor of Technical Sciences, Associate Professor Protopopov A.V.

    6.

    Powder coatings from production waste.

    Printed

    Proceedings of the Inter-Republican Conference “Properties of Powder Composite Materials and Coatings, and Technology of Their Production Using Pulse Loads and Pressure Treatment”, Volgograd, 1989, pp. 33-36

    4 pp.

    Ermakov S.S., Abdaliev M.A.

    7.

    Influence of temperature on the mechanical properties of powder steel.

    Printed

    Proceedings of the conference “Modern Technological Processes for Producing High-Quality Products by Casting and Powder Metallurgy”, Cheboksary, 1989, pp. 2-3

    2 pp.

    Ermakov S.S., Ermakov B.S.

    Suleimenov E.A.

    8.

    Powder phosphorus-containing coating.

    Printed

    Proceedings of the conference “Occupational Safety and Progressive Technological Processes in Foundry Production, Powder Metallurgy and Mechanical Engineering”, Cheboksary, 1990,

    с.45-48

    4 pp.

    Ermakov S.S., Ermakov B.S.

    Abdaliev M.A.

    9.

    Production of iron-based powder materials with improved properties.

    Printed

    Proceedings of the conference “Occupational Safety and Progressive Technological Processes in Foundry Production, Powder Metallurgy and Mechanical Engineering”, Cheboksary, 1990,

    с.86-90

    5 pp.

    Ermakov S.S.

    Suleimenov E.A.

    10.

    Use of phosphorus production waste in powder metallurgy

    Printed

    Proceedings of the conference “Progressive Methods of Waste Utilization and Resource Saving”, Leningrad, 1991, pp. 5-9.

    5 pp.

    Ermakov S.S.

    Abdaliev M.A.

    11.

    Production of wear- and corrosion-resistant coatings from phosphorus production waste.

    Printed

    Proceedings of the conference “Progressive Methods of Waste Utilization and Resource Saving”, Leningrad, 1991, pp. 15-19

    5 pp.

    Ermakov S.S.

    Suleimenov E.A., Abdaliev M.A.

    Academic Secretary of the Council of SKSU, Candidate of Technical Sciences, Associate Professor Pusurmanova G.Zh.

    Degree applicant, Doctor of Technical Sciences, Associate Professor Protopopov A.V.

    1

    2

    3

    4

    5

    6

    12.

    Получение износокоррозионностойких покрытий из отходов фосфорного производства.

    Печ.

    Материалы научно-технической конференции«Конструкционные, инструментальные порошковые и композиционные материалы».-Ленинград,1991,с.22-27

    6 стр

    Ермаков С.С.

    Абдалиев М.А.

    13.

    Использование отходов фосфорного производства в порошковой металлургии

    Печ.

    Материалы научно-технической конференции«Конструкционные, инструментальные порошковые и композиционные материалы».-Ленинград,1991,с.33-35

    3 стр

    Ермаков С.С.

    Абдалиев М.А, Сулейменов Э.А.

    14.

    Способ изготовления спеченных изделий

    Печ.

    А.С. №1804020,Опубл.19.03.90.

    Абдалиев М.А. Сулейменов Э.А. Комекбаев А.А.

    15.

    Подшипник скольжения.

    Печ.

    А.С. №1820060,Опубл.12.10.92.

    Протопопов М.А.

    16.

    Технология литья биметаллических отливок с коррозионностойким рабочим слоем

    Печ.

    Наука и образование Южного Казахстана, №3,Шымкент,1996,

    с.25 -27

    3 стр

    Болысбеков У.Б.

    Протопопова Л.С. Сулейменов Э.А.

    17.

    Огнестойкое покрытие на основе фосфорсодержащего сплава.

    Печ.

    Наука и образование Южного Казахстана,№3,Шымкент,1996,

    с.30-33

    3 стр

    Болысбеков У.Б.

    Протопопова Л.С. Сулейменов Э.А. Сейтказенова К.К.

    18.

    Метастабильная эвтектика железофосфористого сплава в технологии специальной металлокерамики.

    Печ.

    Сборник научных трудов. Перспективные направления развития химии и химической технологии, Шымкент,1999,с.57-61

    5 стр

    Тойжанов К.Д.

    19.

    Теоретические основы и технология переработки феррофосфора в товарные продукты.

    Печ.

    Труды международной научно-практической конференции «Перспективные направления развития химии и химической технологии»,Шымкент,1999,с.54-55

    2 стр

    Тойжанов К.Д. Протопопова С.А.

    Academic Secretary of the Council of SKSU, Candidate of Technical Sciences, Associate Professor Pusurmanova G.Zh.

    Degree applicant, Doctor of Technical Sciences, Associate Professor Protopopov A.V.

    1

    2

    3

    4

    5

    6

    20.

    Roasting of ferrophosphorus in a fluidized granular bed furnace.

    Printed

    Proceedings of the international scientific and technical conference “Science and Education – Effective Levers for Implementing the Strategy Kazakhstan – 2030”, Shymkent, 1998, pp. 355-358

    4 pp.

    Moldabekov Sh.M., Baideldinov M.U., Toizhanov K.D., Protopopova S.A.

    21.

    Production of phosphoric acid by roasting powder briquettes of ferrophosphorus and iron.

    Printed

    Наука и образование Южного Казахстана, No. 6, Shymkent, 1998,

    с. 10-13

    4 pp.

    Suleimenov E.A., Protopopova S.A., Baideldinov M.U., Toizhanov K.D.

    22.

    Phosphorus-containing cermet material in bimetal technology

    Printed

    Наука и образование Южного Казахстана, No. 7, Shymkent, 1997,

    с.111-113

    3 pp.

    Moldabekov Sh.M., Izbaskhanov K.S.

    23.

    Powder materials.

    Printed

    Alma-Ata: Gylym. 1991.

    344 pp.

    Ermakov S.S., et al.

    24.

    Chemistry of the synthesis process of a special material with ferrophosphorus

    Printed

    Наука и образование Южного Казахстана, No. 3, Shymkent, 1998,

    с. 156-158

    3 pp.

    Izbaskhanov K.S.

    Moldabekov Sh.M.

    25.

    Corrosion resistance of the phosphorus-containing cermet material Fe-Cr-Ni-P-C in technical sulphuric acid.

    Printed

    Наука и образование Южного Казахстана, No. 7, Shymkent, 1997,

    с. 109-111

    3 pp.

    Moldabekov Sh.M., Izbaskhanov K.S.

    Academic Secretary of the Council of SKSU, Candidate of Technical Sciences, Associate Professor Pusurmanova G.Zh.

    Degree applicant, Doctor of Technical Sciences, Associate Professor Protopopov A.V.

    1

    2

    3

    4

    5

    6

    26.

    Mechanism and kinetics of the process of roasting ferrophosphorus in a fluidized bed.

    Printed

    Proceedings of the Republican scientific and practical conference “Theory and Practice of Intensification, Resource and Energy Saving in Chemical Technology and Metallurgy”, Shymkent-Almaty, 2000, pp. 35-38.

    4 pp.

    Moldabekov Sh.M., Baideldinov M.U.

    27.

    New concepts of the structure of the Fe2P–Fe eutectic melt.

    Printed

    Proceedings of the Republican scientific and practical conference “Theory and Practice of Intensification, Resource and Energy Saving in Chemical Technology and Metallurgy”, Shymkent-Almaty, 2000, pp. 39-43

    5 pp.

    28.

    Processing of ferrophosphorus and technologies for using the processing products in the production of special materials.

    Printed

    Proceedings of the international scientific and practical conference “Mechanical Engineering in a Market Economy. Problems and Prospects”, Taraz, 1999, pp. 99-101.

    3 pp.

    29.

    Corrosion-resistant protective coatings made of powder phosphorus-containing chromium-nickel alloy for chemical apparatus.

    Printed

    Proceedings of the international scientific and practical conference “Mechanical Engineering in a Market Economy. Problems and Prospects”, Taraz, 1999, pp. 68-70.

    3 pp.

    Toizhanov K.D., Moldabekov Sh.M.

    30.

    Structure of the melt of the metastable eutectic (Fe2P–α Fe)

    Printed

    Proceedings of the 2nd regional scientific and methodological conference dedicated to the 10th anniversary of the independence of the Republic of Kazakhstan, in the journal Наука и образование Южного Казахстана, No. 20, Taraz, 2000, pp. 120-122

    3 pp.

    31.

    Energy-saving technologies for processing ferrophosphorus.

    Printed

    Almaty, Kitap Palatasy. 2001

    120 pp.

    Moldabekov Sh.M.

    Academic Secretary of the Council of SKSU, Candidate of Technical Sciences, Associate Professor Pusurmanova G.Zh.

    Degree applicant, Doctor of Technical Sciences, Associate Professor Protopopov A.V.

    1

    2

    3

    4

    5

    6

    32.

    Способ получения биметаллических отливок со слоем основного металла из чугуна.

    Печ.

    Предварительный патент РК № 7111, Опубл. 15.02.1999 бюл.№2.

    Протопопова Л.С. Хусанов Ф.И.

    33.

    Способ получения биметаллических отливок со слоем основного металла из стали.

    Печ.

    Предварительный патент РК № 7112, Опубл. 15.02.1999 бюл.№2.

    Протопопова Л.С. Хусанов Ф.И.

    34.

    Способ получения фосфорной кислоты.

    Печ.

    Предварительный патент РК №8127, Опубл 28.09 98 бюл № 3

    Молдабеков Ш.М. Тойжанов К.Д. Протопопова С.А.

    35.

    Способ производства технического кремния.

    Печ.

    Предварительный патент РК №8522, Опубл.15.02.2000, бюл.№2

    Тулебаев А.К.

    Бажиров Н.С. Битемиров М.К.

    36

    Материал для поглощения и защиты от излучений в сверхвысокочастот-ном диапазоне

    Печ.

    Предварительный патент РК №4766

    Опубл.16.06.1997,бюл.№2.

    Томилин И.А.

    Бекетов Б.А.

    Тихонов Е.П.

    37

    Способ переработки феррофосфора

    Печ.

    Предварительный патент РК №10189

    Опубл.15.05.2001,бюл.№5.

    Байдельдинов М.У.

    38

    Высокопроизводительная технология получения поликристаллического кремния

    Печ.

    Новости науки Казахстана, №3, Алматы, 1999, с. 21-23.

    3стр.

    Бажиров Н.С. Протопопова С.А.

    39

    Процесс кипения частиц феррофосфора в воздушном потоке при 9500С.

    Печ.

    Труды Международной конферен-ции «Процессы и аппараты хими-ческой технологии (ПАХТ-201), Ч1, Шымкент, 2001,с.152-155.

    4стр.

    40

    Процесс взаимодействия феррофосфора и гематита в реакторе для обжига брикетов.

    Печ.

    Труды Международной конферен-ции «Процессы и аппараты хими-ческой технологии (ПАХТ-201), Ч1, Шымкент, 2001,с.240-243.

    4стр.

    41

    Теоретические предпосылки создания новых технологий получения высокочистых веществ электролизом эвтектических расплавов.

    Печ.

    Труды Международной конферен-ции «Процессы и аппараты химичес-кой технологии (ПАХТ-201), Ч2, Шымкент,2001,с.339-341

    3стр.

    Academic Secretary of the Council of SKSU, Candidate of Technical Sciences, Associate Professor Pusurmanova G.Zh.

    Degree applicant, Doctor of Technical Sciences, Associate Professor Protopopov A.V.

    1

    2

    3

    4

    5

    6

    42

    Структура расплава метастабильной эвтектики (Fe2P-αFe).

    Печ.

    КИМС,№5,Алматы, 2001, с 54-58

    3стр.

    43

    Технология наплавки защитных покрытий на рабочие поверхности кессонов шахтных печей.

    Печ.

    КИМС,№4, Алматы,2001, с 53-58

    3стр.

    Байдельдинов М.У. Алыбаев Ж.А. Жантасов Е.Т.

    44

    Влияние карбидной фазы на скачкообразный рост зерен аустенита

    Печ.

    Материалы научно-практической конференции «Молодые учёные и специалисты Томской области в девятой пятилетке»,Томск,1975, с.29-31

    3 стр.

    РаковМ.В.

    Лаврентьева В.Н.

    45

    Редкоземельные металлы в стали Р6М5

    Печ.

    Научные технический сборник «Технология производства, научная организация труда и управления» , №7,Томск,1977,с.93-96

    4 стр.

    РаковМ.В.

    46

    Влияние вольфрама и редкоземель-ных металлов на размер аустенитно-го зерна быстрорежущей стали

    Печ.

    Материалы научно-практической конференции «Молодые учёные и специалисты Томской области в десятой пятилетке»,Томск,1977, с.56-57

    2 стр.

    РаковМ.В.

    47

    Об одной модели поверхности, связующей концентрацию РЗМ и температуру с пластичностью литой стали Р6М5

    Печ.

    Межвузовский сборник научных трудов «Моделирование задач науки и техники методом начертательной геометрии»,Шымкент, 1985,с.11-13

    3стр

    48

    Методика измерения давления слоя жидкости с использованием механотропного преобразования

    Печ.

    ВИНИТИ «Депонированные научные работы», №11,Москва, 1988, с. 200-205

    6стр

    Тарасова С.В.

    Шауберт Г.Г.

    49

    Программа расчётов основных геометрических размеров червячного зацепления на ЭВМ

    Печ.

    ЦНТИ Инф.лист №94,Шымкент, 1989

    5 стр.

    Кирасиров О.М.

    50

    Методическое пособие «Металлографический анализ металлов и сплавов»

    Печ.

    Ротапринт ТПИ, Томск, 1979

    20 стр.

    Academic Secretary of the Council of SKSU, Candidate of Technical Sciences, Associate Professor Pusurmanova G.Zh.

    Degree applicant, Doctor of Technical Sciences, Associate Professor Protopopov A.V.

    1

    2

    3

    4

    5

    6

    51

    Методические указания по дипломному проектированию

    Печ.

    Ротапринт ТПИ, Томск, 1981

    20 стр.

    Беликов Е.В.

    52

    Методическое пособие «Изучение конструкции цилиндрических и червячных зубчатых передач»

    Печ.

    Типография КазХТИ,Шымкент,1989

    12 стр.

    Кирасиров О.М.

    53

    Разработка технологии изготовления втулки А36-22 из железного порошка

    Печ.

    Отчёт по хоз.дог.Инв.№181409, .№ гос.регистрации 01840043118, Шымкент,1985

    180 стр.

    Султанов Ф.

    Киргизбаев И.П.

    Ветрова Е.М.

    54

    Количественная оценка прессуемо-сти металлических порошков

    Печ.

    Депон.№ 1062.10.09.85

    5 стр

    Тарасова С.В.

    СулейменовЭ.А.

    55

    Технология получения железофосфористого сплава с ограниченной концентрацией по фосфору

    Печ.

    Инф.лист №48, Шымкент, 1998, Каз.Гос.ИНТИ

    3 стр

    Тойжанов К.Д.

    56

    Энергосберегающая технология наплавки защитных покрытий на сталь

    Печ.

    Инф.лист №26, Шымкент, 1998, Каз.Гос.ИНТИ

    3 стр.

    Тойжанов К.Д.

    57

    Применение феррофосфора в производстве биметаллических отливок

    Печ.

    Сб.научных трудов «Проблемы естественно-технических наук на современном этапе», Бишкек, 2002,с.210-214

    5 стр

    58

    Поведение феррофосфора в потоке окислителя при обжиге в псевдоожиженном слое.

    Печ.

    Материалы международной научно-практической конференции «Химия:наука,образование,промышленность.Возможности и перспективы развития»,Павлодар,2001, с.29-31

    3 стр.

    Байдельдинов М.У.

    Academic Secretary of the Council of SKSU, Candidate of Technical Sciences, Associate Professor Pusurmanova G.Zh.

    Degree applicant, Doctor of Technical Sciences, Associate Professor Protopopov A.V.

    1

    2

    3

    4

    5

    6

    59

    Коррозионно-стойкие биметаллы

    Печ.

    Научные труды ЮКГУ им. М. О. Ауезова, №1,Шымкент,2001,с.93-96

    4 стр.

    60

    Получение биметаллических отливок

    Печ.

    КИМС,№2, 2002, с 35-40

    6 стр.

    Жантасов К.Т.

    Алыбаев Ж.А.

    Тойжанов К.Д.

    61

    Экологическое значение переработки фосфатного сырья на целевые продукты

    Печ.

    Жизнь и безопасность,№1-2,Санкт-Петербург,2002.с345-347

    3стр

    Жантасов К.Т.

    Молдабеков Ш.М.

    Алтеев Т,

    Байжанова С.Б.

    62

    Взаимодействие оплавленных частиц в псевдоожиженном слое

    Печ.

    Сб.научных трудов «Проблемы естественно-технических наук на современном этапе», Бишкек, 2002,с.215-222

    8 стр

    Байдельдинов М.У.

    63

    Использование вторичных ресурсов при получении биметаллических изделий методом литья

    Печ.

    Вестник.Министерство образования и культуры Кыргызской республики. Материалы Республиканской конференции «Концептуальные основы преподавания экологии в вузах и региональные проблемы экологии Кыргызстана», выпуск 1, Бишкек, 2002,с.166-170

    5 стр.

    Маймеков З.К.

    Маматаев Н.Э.

    64

    Слипание оплавленных частиц феррофосфора в псевдоожиженном слое -фактор снижения отходов производства

    Печ.

    Вестник.Материалы Республиканс-кой конференции «Концептуальные основы преподавания экологии в ву-зах и региональные проблемы эколо-гии Кыргызстана», выпуск 1, Бишкек, 2002,с.162-166

    5 стр.

    Маймеков З.К.

    Маматаев Н.Э.

    65

    Эвтектические расплавы в качестве электролита для получения экологически чистых веществ

    Печ.

    Вестник.Материалы Республикан-ской конференции «Концептуальные основы преподавания экологии в вузах и региональные проблемы экологии Кыргызстана», выпуск 1, Бишкек, 2002,с.159-161

    3 стр.

    Маймеков З.К.

    Сулейменов Э.А.

    Academic Secretary of the Council of SKSU, Candidate of Technical Sciences, Associate Professor Pusurmanova G.Zh.

    Degree applicant, Doctor of Technical Sciences, Associate Professor Protopopov A.V.

    1

    2

    3

    4

    5

    6

    66

    Developments for converting the AKM-312 sintering machine of the NDFZ (Novo-Dzhambul Phosphorus Plant) to roasting of lump phosphorites and improving the ecological situation.

    Printed

    Proceedings of the international scientific and practical conference “Problems of Chemical Technology of Inorganic, Organic, Silicate and Building Materials and Training of Engineering Personnel”, vol. 3, Shymkent, 2002, pp. 148-150

    3 pp.

    Zhantasov M.K.

    Zhantasov K.T.

    Moldabekov Sh.M.

    Balabekov O.S.

    Barlybaev M.R.

    67

    Current problems in the preparation of Karatau phosphate raw materials for electrothermal processing

    Printed

    Proceedings of the international scientific and practical conference “Problems of Chemical Technology of Inorganic, Organic, Silicate and Building Materials and Training of Engineering Personnel”, vol. 3, Shymkent, 2002, pp. 150-154

    4 pp.

    Zhantasov M.K.

    Zhantasov K.T.

    Barlybaev M.R.

    Eminov S.Kh.

    68

    Possibility of extracting rare-earth elements into a concentrate during processing of Karatau phosphorites

    Printed

    Поиск, No. 4, Almaty, 2003.

    5 pp.

    Zhantasov K.

    Alteev T.

    Moldabekov Sh.

    Sandt F.

    69

    Developments for the reconstruction of the AKM-312 sintering machine for roasting lump phosphorite

    Printed

    Поиск, No. 4, Almaty, 2003.

    3 pp.

    Zhantasov M.

    Barlybaev M.

    Volnenko A.

    70

    Production of an iron-phosphorus eutectic melt in an electrolyser

    Printed

    Proceedings of the international scientific and practical conference “Auezov Readings-4” and the third scientific conference of universities of the Southern region, vol. 8, Shymkent, 2004, pp. 14-15

    2 pp.

    Abdaliev M.A.

    Protopopova L.S.

    Suleimenov E.A.

    71

    Features of electrochemical refining of silicon in artificial slag melts

    Printed

    Proceedings of the international scientific and practical conference “Auezov Readings-4” and the third scientific conference of universities of the Southern region, vol. 8, Shymkent, 2004, pp. 77-79

    3 pp.

    Protopopova L.S.

    Suleimenov E.A.

    Academic Secretary of the Council of SKSU, Candidate of Technical Sciences, Associate Professor Pusurmanova G.Zh.

    Degree applicant, Doctor of Technical Sciences, Associate Professor Protopopov A.V.

    1

    2

    3

    4

    5

    6

    72

    Roasting of ferrophosphorus in a fluidized bed

    Printed

    Proceedings of the scientific and practical workshop-meeting “Current State and Problems of Electrothermal, High-Temperature Processes of Chemical Technology and Metallurgy”, Shymkent, May 2004, pp. 149-151

    3 pp.

    Baideldinov M.U.

    73

    Phosphorus-containing materials in aggressive environments

    Printed

    Proceedings of the scientific and practical workshop-meeting “Current State and Problems of Electrothermal, High-Temperature Processes of Chemical Technology and Metallurgy”, dedicated to the 40th anniversary of the opening of the specialty “Technology of Electrothermal Production” and the 70th anniversary of O.M. Tleukulov, Shymkent, May 2004, pp. 159-162

    4 pp.

    Abdaliev M.A.

    Bazhirov T.S.

    Suleimenov E.A.

    Tulyaev Yu.K.

    Protopopov M.A.

    74

    Technology of silicon reduction from quartzites of South Kazakhstan

    Printed

    Proceedings of the scientific and practical workshop-meeting “Current State and Problems of Electrothermal, High-Temperature Processes of Chemical Technology and Metallurgy”, dedicated to the 40th anniversary of the opening of the specialty “Technology of Electrothermal Production” and the 70th anniversary of O.M. Tleukulov, Shymkent, May 2004, pp. 88-89

    2 pp.

    Bishimbaev V.K.

    Suleimenov E.A.

    Protopopov S.A.

    75

    Impeller of a centrifugal fan

    Printed

    Invention patent No. 11433. Published 15.04.2002, Bulletin No. 4

    3 pp.

    Sermanizov S.S.

    Protopopov M.A.

    Academic Secretary of the Council of SKSU, Candidate of Technical Sciences, Associate Professor Pusurmanova G.Zh.

    Doctor of Technical Sciences, Associate Professor Protopopov A.V.

    1

    2

    3

    4

    5

    6

    76

    Method of decarbonization of phosphorites

    Printed

    Preliminary invention patent No. 15011. Published 15.11.2004, Bulletin No. 11

    3 pp.

    Zhantasov K.T.

    Moldabekov Sh.M.

    др.

    77

    Technology of silicon reduction from quartzites of South Kazakhstan

    Printed

    Вестник. Proceedings of the Republican conference “Conceptual Foundations of Teaching Ecology at Universities and Regional Problems of Ecology of Kyrgyzstan”, issue 1, Bishkek, 2004,

    с.162-164

    3 pp.

    Bishimbaev V.K.

    Suleimenov E.A.

    Protopopova S.A.

    78

    Phosphorus-containing materials in aggressive environments

    Printed

    Вестник. Proceedings of the Republican conference “Conceptual Foundations of Teaching Ecology at Universities and Regional Problems of Ecology of Kyrgyzstan”, issue 1, Bishkek, 2004,

    с.152-154

    3 pp.

    Abdaliev M.A.

    Protopopova M.A.

    Suleimenov E.A.

    79

    Electrochemical dissolution of ferrophosphorus and iron in a eutectic melt

    Printed

    Proceedings of the international scientific and practical conference “The Scientific Heritage of E. Buketov”, dedicated to the 80th anniversary of the birth of E. Buketov, vol. 1, Petropavlovsk, March 2005, pp. 101-104

    4 pp.

    Abdaliev M.A.

    Protopopova L.S.

    Suleimenov E.A.

    Bazhirov T.S.

    80

    Production of a high-purity carbon reducing agent for the production of high-purity silicon

    Printed

    Proceedings of the international scientific and practical conference “The Scientific Heritage of E. Buketov”, dedicated to the 80th anniversary of the birth of E. Buketov, vol. 1, Petropavlovsk, March 2005, pp. 199-200

    2 pp.

    Protopopova S.A.

    Suleimenov E.A.

    Protopopov M.A.

    Academic Secretary of the Council of SKSU, Candidate of Technical Sciences, Associate Professor Pusurmanova G.Zh.

    Doctor of Technical Sciences, Associate Professor Protopopov A.V.

    1

    2

    3

    4

    5

    6

    81

    Process of silicon reduction from silica by ionized gas

    Printed

    Proceedings of the international scientific and practical conference “The Scientific Heritage of E. Buketov”, dedicated to the 80th anniversary of the birth of E. Buketov, vol. 2, Petropavlovsk, March 2005, pp. 16-17

    2 pp.

    Bishimbaev V.K.

    Protopopova S.A.

    Suleimenov E.A.

    82

    Gas-thermal coating of powder iron.

    Printed

    Russian republican scientific and technical conference “Progressive Production Technologies, Structure and Properties of Products Made of Composite Materials and Coatings”.

    Volgograd, 1992,

    2 pp.

    Abdaliev M.A.

    Ermakov S.S.

    83

    Production of a high-purity carbon reducing agent for the production of high-purity silicon.

    Printed

    Republican scientific journal

    Наука и образование Южного Казахстана. No. 5(40), vol. 1, Shymkent,

    2004г, с 96-98

    3 pp.

    Suleimenov E.A.

    Protopopova S.A.

    84

    Roasting machine for decarbonization of materials

    Printed

    Preliminary patent No. 15756, published 16.05.2005, Bulletin No. 5

    5 pp.

    Zhantasov K.T., Moldabekov Sh.M., Barlybaev M.R., Eminov S.Kh.

    85

    Device for regulating the temperature of process gases

    Printed

    Preliminary patent No. 16870, published 16.01.2006, Bulletin No. 1

    Zhantasov M.K., Barlybaev M.R., Volnenko A.A., Tapalov T.T.

    Academic Secretary of the Council of SKSU, Candidate of Technical Sciences, Associate Professor Pusurmanova G.Zh.

    Degree applicant, Doctor of Technical Sciences, Associate Professor Protopopov A.V.

    1

    2

    3

    4

    5

    6

    86

    Possible ways of improving the process of decarbonization and thermal preparation of raw materials for phosphorus production

    Printed

    Proceedings of the international scientific and practical conference

    “Processes, Machines and Apparatus of Industrial Technologies”, Shymkent, 2006, pp. 71-74

    4 pp.

    Zhantasov M.K., Barlybaev M.R., Volnenko A.A., Tapalov T.T., Zhantasov K.T., Alteev T.

    87

    Method of processing ferrophosphorus

    Decision on the grant of a preliminary invention patent.

    Application No. 2004/01381

    Bishimbaev V.K., Suleimenov E.A., Baideldinov M.U.,

    Abdaliev M.A.

    88

    Method of producing silicon

    Preliminary invention patent No. 16638

    Bishimbaev V.K., Suleimenov E.A.

    89

    Production of alloys based on gallium and silicon

    Proceedings of the international scientific and practical conference “Industrial and Innovative Development as the Basis of a Sustainable Economy of Kazakhstan”, Shymkent, 2006, vol. 3, pp. 8-10

    3 pp.

    Protopopov M.A.

    90

    Electrolytic dissolution of iron and ferrophosphorus in an iron-phosphorus eutectic melt

    Printed

    Proceedings of the international scientific and practical conference “Industrial and Innovative Development as the Basis of a Sustainable Economy of Kazakhstan”, Shymkent, 2006, vol. 3, pp. 3-8

    6 pp.

    Abdaliev M.A.

    Shoinbaev A.A.

    Academic Secretary of the Council of SKSU, Candidate of Technical Sciences, Associate Professor Pusurmanova G.Zh.

    Degree applicant, Doctor of Technical Sciences, Associate Professor Protopopov A.V.

    1

    2

    3

    4

    5

    6

    91

    Electrolytic production of silicon in special melts. Problems and ways of solving them.

    Printed

    Proceedings of the international scientific and practical conference “Industrial and Innovative Development as the Basis of a Sustainable Economy of Kazakhstan”, Shymkent, 2006, vol. 3, pp. 209-210

    2 pp.

    Tutkabaev T.M.

    Shoinbaev A.A.

    92

    Some features of the silicon reduction process from quartzite in a plasma furnace

    Printed

    Proceedings of the international scientific and practical conference “Industrial and Innovative Development as the Basis of a Sustainable Economy of Kazakhstan”, Shymkent, 2006, vol. 3, pp. 238-241

    4 pp.

    Suleimenov E.A.

    Protopopova S.A.

    93

    Monitoring and regulation of temperature in a plasma furnace

    Printed

    Proceedings of the international scientific and practical conference “Industrial and Innovative Development as the Basis of a Sustainable Economy of Kazakhstan”, Shymkent, 2006, vol. 3, pp. 242-244

    3 pp.

    Suleimenov E.A.

    Protopopova S.A.

    94

    Reduction of silicon from natural quartzites by carbon monoxide

    Printed

    Известия Вузов, Bishkek, 2004, No. 8, pp. 104-106

    3 pp.

    Abdaliev M.A.

    Academic Secretary of the Council of SKSU, Candidate of Technical Sciences, Associate Professor Pusurmanova G.Zh.

    Degree applicant, Doctor of Technical Sciences, Associate Professor Protopopov A.V.

    1

    2

    3

    4

    5

    6

    95

    Phosphorus-containing materials in protective coatings

    Printed

    Известия Вузов, Bishkek, 2004, No. 9, pp. 101-104

    4 pp.

    Abdaliev M.A.

    96

    Device for granulating molten slag

    Printed

    Decision on the grant of a preliminary patent.

    Application No. 2006/0679.1

    Protopopov A.V.

    Suleimenov E.A.

    Serikbaev B.E.

    Bazhirov N.S.

    Bazhirov T.S.

    97

    Device for producing granulated slag

    Printed

    Decision on the grant of a preliminary patent.

    Application No. 2006/0678.1

    Protopopov A.V.

    Suleimenov E.A.

    Serikbaev B.E.

    Bazhirov N.S.

    Bazhirov T.S.

    98

    Low-cycle strength of large-diameter welded pipes of main gas pipelines

    Printed

    «Механика и моделирование процессов и технологии», Taraz, 2007, No. 2, pp. 222-225

    4 pp.

    Arapov B.R.

    Dzhumabaev A.A.

    Dutbaev Zh.T.

    99

    Influence of the winding angle of the winding thread on the stress state of a prestressed shell

    Printed

    «Механика и моделирование процессов и технологии», Taraz, 2007, No. 2, pp. 225-230

    5 pp.

    Ainabekov A.Kh.

    Suleimenov U.S.

    Zhanabai N.Zh.

    Academic Secretary of the Council of SKSU, Candidate of Technical Sciences, Associate Professor Pusurmanova G.Zh.

    Degree applicant, Doctor of Technical Sciences, Associate Professor Protopopov A.V.

    1

    2

    3

    4

    5

    6

    100

    Methodology for testing pipe steels under a complex stress state and low-cycle fatigue

    Printed

    «Механика и моделирование процессов и технологии», Taraz, 2007, No. 2, pp. 216-219

    3 pp.

    Dzhumabaev A.A.

    Zholshieva L.Z.

    Aldasheva L.

    Dutbaev Zh.T.

    101

    Analysis of cutting temperature distribution in rotary machining of materials

    Printed

    «Наука и образование», Shymkent, 2007, No. 4, pp. 26-31

    5 pp.

    Amanbaev T.R.

    Pechersky V.

    102

    Ecological and economic aspects of the utilization of mining and metallurgical production waste

    Printed

    «Наука и образование», Shymkent, 2007, No. 4, pp. 84-87

    3 pp.

    Bazhirov T.S., Syzdykov N.S.

    Bazhirova K.N.

    103

    Modelling of the heating parameters of quartzite particles in silicon production

    Printed

    Republican scientific and practical conference “The Role and Tasks of Educational Institutions in Shaping the Foundations of the ‘Smart Economy’”, Shymkent, 2007, No. 1

    с.15-18

    Atovullaev A.U.

    Suleimenov E.A.

    104

    Electrochemical dissolution of ferrophosphorus and iron in a melt of their eutectic

    Printed

    ТАБИГЫЙ ИЛИМДЕР ЖУРНАЛЫ

    Kyrgyz-Turkish “Manas” University, Bishkek, No. 1, 2007, pp. 11-16

    5 pp.

    Maimekov Z., Bazhirov N.S.

    Bazhirov T.S.

    105

    Structure and properties of a nanostructured catalyst made of a eutectic alloy

    Printed

    Proceedings of the International scientific and practical conference “Chemistry in Building Materials and Materials Science in the 21st Century”, Shymkent, 2008, vol. 2, pp. 240-244

    4 pp.

    Nazarbekov K.T.

    Tutkabaev T.

    Abdaliev M.

    Academic Secretary of the Council of SKSU, Candidate of Technical Sciences, Associate Professor Pusurmanova G.Zh.

    Degree applicant, Doctor of Technical Sciences, Associate Professor Protopopov A.V.

    1

    2

    3

    4

    5

    6

    106

    Production of bimetal parts by casting

    Printed

    Proceedings of the International scientific and practical conference “Chemistry in Building Materials and Materials Science in the 21st Century”, Shymkent, 2008, vol. 2, pp. 135-137

    3 pp.

    Nazarbekov K.T.

    Suleimenov E.A.

    Tulyaev Yu.K.

    107

    Temperature control in a plasma furnace

    Printed

    Scientific works of M. Auezov SKSU, Shymkent, 2009, No. 1, pp. 13-15

    3 pp.

    Suleimenov E.A.

    Protopopov M.A.

    108

    Furnace for copper removal from crude lead

    Printed

    Innovation patent No. 21713, published 15.09.2009, Bulletin No. 3

    Kaziev M.T., Bishimbaev V.K.

    109

    Electrolytic production of silicon in special melts. Problems and ways of solving them.

    Printed

    Proceedings of the international scientific and practical conference “Industrial and Innovative Development as the Basis of a Sustainable Economy of Kazakhstan”, Shymkent, 2006, vol. 1, pp. 105-108

    4 pp.

    110

    Use of the properties of a metastable eutectic for producing phosphorus anhydride from ferrophosphorus

    Printed

    Proceedings of the 6th student conference on natural, technical, social-humanitarian and economic sciences, dedicated to the 60th anniversary of M. Auezov SKSU, Shymkent, 2003, pp. 74-76

    3 pp.

    Protopopov M.A.

    Academic Secretary of the Council of SKSU, Candidate of Technical Sciences, Associate Professor Pusurmanova G.Zh.

    Degree applicant, Doctor of Technical Sciences, Associate Professor Protopopov A.V.

    1

    2

    3

    4

    5

    6

    111

    Особенности формирования пористой структуры в сплавных катализаторах из эвтектических сплавов

    Труды Международной научно-практической конференции «Ауезовские чтения-8» ,2009, т.5

    с.96-99

    3 стр

    Назарбеков К.Т., Сулейменов Э.А.

    112

    Получение высокоплотных порошковых материалов в условиях жидкофазного спекания для систем Fe-C- P –легирующий элемент

    Труды Международной научно-практической конференции «Ауезовские чтения-8» ,2009, т.5 с.100-104

    4 стр

    Назарбеков К.Т., Абдалиев М.А.

    113

    Мембранный электролиз растворов переработки вольфрамитового концентрата

    Труды Международной научно-практической конференции «Ауезовские чтения-8» ,2009, т.5 с.129-131

    3 стр

    Калоев Г.Г., Исхакова Р.Р., Шоинбаев А.А.

    114

    Восстановление кремния из оксидов в условиях не идеальной плазмы

    Труды Международной научно-практической конференции «Ауезовские чтения-8» ,2009, т.5 с.131-134

    4 стр

    Сулейменов Э.А.,

    Протопопова С.А.

    115

    Reprocessing tungsten concentrate obtained from lain ore cakes of akchatau mining and concentration complex

    Печ

    Scientific Technical Journal INDUSTRIAL TECHNOLOGY AND ENGINEERING,2011,

    1(1): 77-83

    7 стр

    Shoinbaev Amir

    Pirmatov Eshmurat

    DauietbakovTimur

    116

    Особенности восстановления технического оксида кобальта водородом, пропаном и природным газом

    Печ

    Материалы международного совещания «Плаксинские чтения-2011» «Новые технологии обогащения и комплексной переработки труднообаготимого природного и техногенного минерального сырья»,2011,т1 с450-453

    4 стр

    Шоинбаев А.Т., Даулетбаков Т.С., Искакова Ж.Ж

    117

    Способ получения кремния

    Патент на изобретение №46677

    выдан 05.02.2004г.

    Бишимбаев В.К. Сулейменов Э.А.

    118

    Способ получения кремния

    Патент на изобретение №52569

    выдан 04.08.2005г.

    Бишимбаев В.К. ЖантасовК.Т.,

    Ананьев Н.И. и др.

    119

    Экономический анализ и приоритеты развития Южно-Казахстанской области

    Печ

    Издание Южно-Казахстанского государственного университета,2011г.

    194стр

    Бишимбаев В.К., Мырхалыков Ж.У.

    Тастамбетова Г.Р.

    120

    Устройство для гранулирования расплавленного шлака

    Печ

    Патент№57003

    Выдан 15.06.2006г.

    Протопопов А.В.

    Сулейменов Э.А.

    Серикбаев Б.Е.

    Бажиров Н.С.

    БажировТ.С

    121

    Устройство для получения гранулированного шлака

    Печ

    Патент№64810

    Выдан 03.07.2009г.

    Протопопов А.В.

    Сулейменов Э.А.

    Серикбаев Б.Е.

    Бажиров Н.С.

    БажировТ.С

    122

    Установка для получения стекловидного шлака

    Патент №75265

    Выдан 16.01.2012г.

    Серикбаев Б.Е.

    Бажиров Н.С.

    Сулейменов Э.А. Даулетияров М.С.

    123

    Способ извлечения редкоземельных элементов из отходов обогащения полиметаллических руд

    Патент №79615

    Выдан 03.07.2012г

    Батькаев Р.И. Гаппарова К.М.

    124

    Способ извлечения редкоземельных элементов из углей и золошлаковых отходов от их сжигания

    Патент №79611

    Выдан 03.07.2012г

    Батькаев Р.И.

    125

    Способ извлечения редкоземельных элементов из фосфогипса

    Патент № 79620

    Выдан 03.07.2012г.

    Батькаев Р.И.

    126

    Установка для получения стекловидного шлака

    Патент №79648

    Выдан 10.05.2012г.

    Серикбаев Б.Е.

    Бажиров Н.С. Протопопов А.В.

    Сулейменов Э.А. Даулетияров М.С.

    127

    Установка для получения стекловидного шлака

    Патент №79641

    Выдан 10.05.2012г.

    Серикбаев Б.Е.

    Бажиров Н.С. Протопопов А.В.

    Сулейменов Э.А. Даулетияров М.С.

    128

    Устройство для получения гранулированного шлака

    Патент № 56998

    Выдан 15.06.2006

    Протопопов А.В.

    Сулейменов Э.А.

    Серикбаев Б.Е.

    Бажиров Н.С.

    БажировТ.С

    129

    Ориентировочный расчет ожидаемой экономической эффективности производства триоксида вольфрама

    Печ

    Известия научно-технического общества «КАХАК» 2012, №2(36) с71-75

    5стр

    Шоинбаев А.Т., Даулетбаков Т.С., Пирматов Э.А.,

    Зиновьева Л.В.,

    Бабажанов Д.Р.

    130

    Способ переработки вольфрамитовых концентратов

    Патент №73374

    Выдан19.07.2011г.

    Шоинбаев А.Т., Даулетбаков Т.С., Пирматов Э.А.,

    Шоинбаев А.А,

    Искакова Ж.Ж.

    131

    Печь обезмеживания чернового свинца

    Патент №61583

    Выдан 21.11.2007г.

    Казиев М.Т. Бишимбаев В.К.

    132

    Устройство для грануляции жидкого штейна

    Патент №57871

    Выдан21.11.2007г

    Казиев М.Т. Бишимбаев В.К.

    ADD THE LATEST ONES - ……………

Photos

All laboratories

Want to work with university researchers?

Joint research, commissioned work, testing and commercialisation — get in touch with the research units.